VLAN Configuration Lab
Learn to create and manage VLANs. Segment your network and configure interface assignments.
Trunking Configuration Lab
Configure 802.1Q trunks between switches to carry multiple VLANs across a single link.
Inter-VLAN Routing Lab
Configure Router-on-a-Stick to enable communication between different VLANs.
EIGRP Routing Lab
Configure dynamic network communication using the EIGRP protocol.
OSPF Single Area Lab
Configure OSPFv2 in a single area to enable dynamic routing between routers.
OSPF Multi-Area Lab
Advanced OSPF: Configure Areas 1, 0, and 2 and verify Inter-Area routing.
DHCP Configuration Lab
Set up a Cisco Router to act as a DHCP server for a LAN.
IPv6 Configuration Lab
Enable IPv6 routing and configure Global Unicast addresses on Cisco routers.
RIPv2 Routing Lab
Configure the Routing Information Protocol (RIPv2) for dynamic routing.
Static Routing Lab
Learn to configure manual static routes and default routes.
Port Security Lab
Secure switch ports by limiting allowed MAC addresses.
NAT Configuration Lab
Configure Port Address Translation (PAT) to connect to the Internet.
ACL Configuration Lab
Filter network traffic using Standard and Extended Access Control Lists.